ZB2L3 Battery Capacity Tester 1.2-12V 18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester Analyzer
ZB2L3 Battery Capacity Tester 1.2-12V 18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester Analyzer
Spread the cost
No lump sum. No stress. Pick a repayment term that works for your budget — and keep your cash flow intact.
- R75.93/mo 3 months
- R38.4/mo 6 months
- R20.26/mo 12 months
- From R75.93/month over 3 months, or as low as R20.26/month over 12. Total repayable over 12 months: R243.12. Interest at 20.75% p.a. applies.
- Quick online application — most people get a decision within minutes. Your first payment only kicks in 30 days after you buy.
- Mobicred is a registered South African credit provider (NCR reg. NCRCP7852). Available to SA residents aged 18+ with a valid ID and bank account.
At checkout, simply select Mobicred as your payment method.
Continue to checkoutDon't have Mobicred yet? Apply free — takes about 2 minutes →
Mobicred is a revolving credit facility provided by Retail Capital (Pty) Ltd, a registered credit provider (NCR reg. NCRCP7852) in terms of the National Credit Act 34 of 2005. Credit is subject to approval and an affordability assessment. Interest rate: 20.75% p.a. compounded monthly (1.7292%/month). Available to South African residents aged 18 and older. Full terms & conditions apply.
Import Taxes & Duties Included
6-13 business days
In Stock CHN
Processing time: 1-3 days
Couldn't load pickup availability
Description
The ZB2L3 Battery Capacity Tester measures the capacity of various battery types including Li-ion and lead-acid batteries. It is suitable for testing battery performance in applications such as electronics, automotive, and renewable energy systems.
- Power supply voltage: DC 4.5-6V (micro USB interface)
- Working current: ≤ 70mA
- Discharge voltage range: 1.00V - 15.00V (resolution 0.01V)
- End voltage range: 0.5V - 11.0V
- Support through current: ≤ 3.000A (resolution 0.001A)
- Voltage measurement error: < 1% + 0.02V
- Current measurement error: < 1.2% ± 0.002A
- Battery capacity range: 9999Ah (1Ah = 1000mAh)
- Circuit board size: 50mm x 37mm
- Finished product size: 50mm x 37mm x 17mm (L x W x H, including copper foot height)
- Weight: 28g (single board, including copper pillar); 9g (two 5W ceramic resistors); 27g (50W resistor including wire)
- Calibration mode available for accurate measurements
- Error codes for troubleshooting: Err1 (voltage too high), Err2 (voltage too low), Err3 (load discharge current too high), Err4 (current exceeds 3.1A), Err5 (device damage due to improper use)
- Note: Reversed battery connections may damage the circuit switch tube
Questions about features, compatibility, or warranty? Chat with our local support team!
