XY-L10A 6-60V CNC Full Power Off Over Charge Protection Switch(PCB)

• Product type: Other Accessories
• Compatibility: 6-60V batteries
• Material: PCB
• Key feature: Automatic charging control
• Color/Variant: N/A
• Intended use: Everyday use
• Category: Electronics Module

1. Both 6-60V batteries and lithium batteries can be used.
2. LCD display, battery voltage, charging percentage and charging time at a glance.
3. Powerful functions, can automatically charge control, can control the charging time, can set and upload the corresponding parameters through the serial port.
4. Control voltage: DC6-60V.
5. Control current: within 10A.
6. Output type: direct output of various accumulators, lithium batteries.
7. Appearance size: about 7.9x4.2 cm.
8. Weight: about 30 grams.

Function Description:
1. Automatic charging control function: by setting the upper limit voltage UP and lower limit voltage dn; when the battery voltage is less than or equal to the lower limit voltage dn, the relay is turned on, and the charger starts to charge the battery; when the battery voltage is greater than or equal to the upper limit voltage UP, the relay is turned off, completing an automatic charge.
2. Charging time control function.
3. Serial data upload and parameter setting function: The system supports UART data upload and parameter setting function (TTL level).

Button function description:
1. Short press the SET button to display the currently set parameters.
2. Short press the UP button to switch to display the charging percentage and charging time.
3. Short press the DOWN button to select on/off the relay enable. If the relay enable is turned off, OFF will be displayed as a reminder and the relay is disconnected.
4. Press and hold the UP button to set the status of the LCD backlight (L-P).
5. Long press the SET button to enter the parameter setting.

Additional features:
1. Charging time recording function.
2. Parameter automatic detection.
3. Battery connection detection.