WL-0026 Pet Bark Control Devices Training Aid

• Product type: Training Aids
• Compatibility: dogs
• Material: electronic
• Key feature: adjustable sensitivity
• Color/Variant: black
• Intended use: bark control
• Category: Pet Supplies

1. Input voltage: DC-5V
2. Battery capacity: 300mAh
3. Current: 3.7V

Instructions for use:
1. Switch on and off: Press and hold the 2 button in the power-on state, and the indicator will light up at the same time. After about 2 seconds, it will shut down with a beep. In the shutdown state, press the 2 button and the machine will be turned on and enter the standby state at the same time.
2. Adjust the sensitivity: lightly press the 2 button in the power-on state to adjust the sensitivity. Click on a beep for level 1 (lowest sensitivity), and so on up to level 5 (highest sensitivity).
3. Indicator light: After power on, it enters standby mode. The blue indicator light flashes every 2 seconds, stopping after 30 seconds. If triggered by a dog barking, it will flash for another 30 seconds. If the battery is too low, the indicator light will change from blue to flashing red.
4. Charging: If the green indicator light turns to flashing red, it indicates that the battery is low and needs to be charged. After fully charged, the red indicator light will turn blue.
5. Trigger work: Wear the collar around the dog’s neck; barking will trigger the device. The device has multiple levels of response based on barking frequency, with an automatic stop after 5 triggers.